20.22% OFF Non-Promo Items Use READY Code (doesn't apply to TMG targets)

Legacy Ceramic & Polyethylene Plates

SKU
private-label-plates
Regular Price $484.00 Price as Configured $279.99

PE & CERAMIC ARMOR SALE: Save 42%

Get our limited-quantity legacy products at a fraction of the original price: Our Level IV SAPI Ceramic, Level IV Shooters Cut Ceramic and Level III LW Polyethylene. Each plate features design features not seen on plates we currently produce, but like our current product lineup, these plates are held to high-performance standards and are independently tested to stop high-power rifle threats.

Included in Bundle

  • 2 x Legacy Level IV SAPI Body Armor 10" x 12" Plates
Product Configuration
Armor Type *
Legacy IV SAPI Legacy IV Shooters Cut Legacy III LW Polyethylene (+$284)

* Required Fields

Summary

    In stock

    $279.99

    With the new year, the Armored Republic will continue to roll out new body armor designs. Before that happens, though, don’t miss out on the opportunity to get our legacy designs at a fraction of the price:

    The Legacy Level IV SAPI Ceramic plates are rated to stop .30 caliber armor-piercing (AP) bullets- one of the most powerful rifle rounds used in the military and one of the most powerful rounds any piece of armor can stop. They are professionally wrapped in a 600 Denier Water-Resistant cover and are manufactured in the United States. 

    The Legacy Level IV Shooters Cut Ceramic plates are also made of advanced composite materials with a single curve design. Like the SAPI, these plates are tested to stop AP M2 rounds (military armor-piercing rifle bullets). But these plates are also are .25” thinner and .9 pounds lighter than the SAPI Ceramic; this not only gives the benefit of making it easier to carry the armor for extended periods of time but also lets you lay closer to the ground when shooting from a prone position.

    The Legacy Level III Lightweight UHMWPE maximizes comfort and ease of use by being one of the lightest hard armor options, being made of Polyethylene layering rather than ceramic. This means it stops the bullet by “swallowing” the round rather than taking the impact by shattering it. It also is better to wear around bodies of water due to its greater buoyancy. It is tested to stop most rifle threats and all handgun threats in accordance with NIJ 0101.06 recommendations.

    Included in Bundle

    • 2 x Legacy Level IV SAPI Body Armor 10" x 12" Plates

    LEGACY LEVEL IV SAPI PLATES

    • Material: Monolithic Ceramic & Polyethylene
    • Protection: Single-hit protection against .30 caliber armor-piercing (AP) bullets (U.S. Military designation M2 AP) with a specified mass of 10.8g (166gr) and a velocity of 2880 ft/s (+/- 30 ft/s).
    • Dimensions:
      • 10" x 12"
        • Weight: 8.3 lbs (per plate)
        • Thickness: 1"
    • Shelf life: 10 years
    • Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers
    • Manufactured: United States

     

    PLATE OPTIONS:

    LEGACY LEVEL IV SHOOTERS CUT PLATES

    • Material: Monolithic Ceramic & Polyethylene
    • Protection: Single-hit protection against .30 caliber armor-piercing (AP) bullets (U.S. Military designation M2 AP) with a specified mass of 10.8g (166gr) and a velocity of 2880 ft/s (+/- 30 ft/s).
    • Dimensions:
      • 10" x 12"
        • Weight: 7.4 lbs (per plate)
        • Thickness: 0.75"
    • Shelf life: 5 years
    • Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers
    • Manufactured: United States

    LEGACY LEVEL III LIGHTWEIGHT POLYETHYLENE PLATES

    • Material: Polyethylene
    • Protection: Multi-hit protection against 7.62 mm FMJ, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2780 ft/s (+/- 30 ft/s).
    • Dimensions:
      • 10" x 12"
        • Weight: 3.3 lbs (per plate)
        • Thickness: 1.3"
    • Shelf life: 5 years
    • Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers
    • Manufactured: United States

    Recommended Products