A professional grade pair of pairs. Two level III+ Lightweight curved plates and Two Trauma Pads.
AR500 Armor® level III+ Lightweight Armor - the lightest III+ steel armor on the planet. The lowest cost III+ Multi-hit performance at this weight.
AR500 Armor® Trauma Pads are worn behind armor plates and are designed to reduce energy transfer to your body, minimizing felt energy through your armor allowing you to focus on winning the engagement.
Get affordable, level III+ protection without the usual weight of steel plates with this outstanding combination.
AR500 Armor® Patented Lightweight 10” x 12” Level III+ ASC Body Armor (Advanced Shooters Cut), Generation III
Size & Cut: 10" x 12" Advanced Shooters Cut (ASC), can be worn in conjunction with soft body armor plates
Weight: 6.5lbs (± 10% due to hand spraying PAXCON base coat)
Our level III+ Lightweight armor ballistic core performance and balance of achieving multi-hit performance within its designated threat level; rounds exceeding the armors limitations and threat level or extreme multi-hit scenarios may cause the armor to crack upon impact. This result is normal and significantly reduces the rounds velocity, if not completely defeating, opposed to through and through penetration.
AR500 Armor® Blunt Force Trauma Pad (NON-BALLISTIC) Gen. II – Patented Advanced Shooters Cut (ASC) What happens after AR500 Armor® body armor defeats a round? This is a common afterthought. Energy from the impact is transferred to your body. Now what? The follow up question is typically how much energy and how do I prevent injury? Well, there is no specific answer without knowing all variables in the equation. Because life is uncertain we always recommend running AR500 Armor® Trauma Pads. Each trauma pad is specially engineered to mitigate blunt force trauma in case your armor takes a round. Our Trauma Pads will reduce the amount of back face deformation that could occur and reduce risk of injury after impact. All AR500 Armor® in standalone configurations perform very well in tests against back face deformation (BFD) and energy transfer, and are designed with BFD in mind. Our Trauma Pads add to the level of effectiveness already exhibited in AR500 Armor® Body Armor. Designed to be worn in conjunction with and behind your body armor, our Trauma Pads reduce the amount of energy transfer to your body, reducing felt energy through your armor. Our patented Advance Shooters Cut (ASC) matches perfectly to our Level IIIA, III, III+, and III+ Lightweight body armor improving ergonomics with your rifle. Compatible with AR500 Armor® Body Armor and other armor systems along with most plate carriers. Trauma pads are Non-Ballistic and offer no increase in ballistic protection. Available in: 8” x 10”, 10” x 12”, and 11” X 14” Advanced Shooters Cut sizes. Weight: 8” x 10” ASC – 5.4 ounces 10” x 12” ASC – 5.9 ounces 11” x 14” ASC – 6.2 ounces Profile: 0.25” Ultra-Thin
|Armor Level||Level III+ LW|
|Armor Threat Rating||Level III+ LW multi-hit protection against calibers up to 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39(ie AK-47), 7.62x51 M80 NATO Ball (ie .308) at 2,850 FPS. Not rated for AP rounds.|
|Armor Cut Orientation:||Right Handed|
|Dimensions||10" x 12"|
|Armor Construction Material||Ballistic steel core|
|Armor Shelf Life||20 Years|
- Comfortable protection Review by T-Boy
- Outstanding. Review by Travis F.