AR Complete Loadout
If you’re looking for a bundle that covers most any situation for which you might need armor, take a look at the AR Complete Loadout. From the ultra-discreet Phoenix Armored Backpack™ to the full-featured Testudo Gen 2.0™, the Complete Loadout has you covered.
Complete Loadout Includes:
- AR Freeman Bundle: one
- AR Concealment Bundle: one Medium The AR Concealment Plate Carrier will only hold soft armor)*
- Phoenix Armored Backpack: one Phoenix 2.0 Armored Backpack with Level IIIA Rimelig 10x12 armor panels
From ultra-discreet to a full tactical loadout, our AR Complete Loadout covers practically every scenario you could use armor for.
Our Testudo Gen 2.0 holds 10” x 12” plates, has generous padding, and includes a full-size cummerbund. It has everything you need, right out of the box.
We’re also including our AR Freeman™, our 9” x 9” carrier, and armor system that covers your vitally important center mass organs, yet is small enough to fit into a backpack or under a car seat.
Add to this our AR Concealment Carrier™ with soft armor panels, and you have a concealable ballistic system capable of stopping handgun rounds up to .44 magnum
Finally, we’ve included our Phoenix Armored Backpack™, an ultra-discreet armor system that protects against the same handgun rounds as our concealment armor, but in a form factor useful for work, school, or your everyday life.
TESTUDO & A1 BODY ARMOR
- Material: 500D Nylon
- Supported Plate Size: 10”x12” & 11"x14"
- Size: For body types M to 3XL
- Weight: Carrier (3.6 lbs) + Armor (13 lbs) = 16.6 lbs
- Armor Protection: Edge-to-edge multi-hit protection against 5.56x45 M193, 5.56x45 M855/SS109 at 3,000 FPS (+/- 30FPS) and 7.62x39(ie AK-47), 7.62x51 M80 NATO Ball (ie .308) at 2,850 FPS. Not rated for AP rounds.
- Armor Form: Curved
- Features: Front and rear Velcro panels & laser-cut PALS systems
- Manufactured: Vietnam (AR500 Armor)
AR FREEMAN & LEVEL 3 ARMOR
- Material: Laminated laser-cut Cordura® front and Cordura 500D Nylon back
- Supported Plate Size: 9”x9”
- Size: For body types S to XL
- Weight: Carrier (0.54 lbs) + Armor (11 lbs) = 11.54 lbs
- Armor Protection: Edge-to-edge multi-hit protection against 7.62 mm FMJ, steel-jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147gr) and a velocity of 2780 ft/s (+/- 30 ft/s).
- Armor Form: Curved
- Features: Front and rear Velcro panels, Velcro attachment points for pontoon pads
- Manufactured: Vietnam (AR500 Armor)
AR CONCEALMENT & S2 SOFT ARMOR PANELS
- Material: Tactical Polyester Blend
- Supported Plate Sizes: 10”x12” & 11"x14"
- Size: for body types M to XXL
- Weight: Carrier (0.54 lbs) + Armor (2.5 lbs) = 3.04 lbs
- Armor Protection: Multi-hit protection against .357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1 g (125 gr) and a velocity of 1470 ft/s (+/- 30 ft/s) and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass
- Features: Hypalon shoulder straps and low-profile Velcro on shoulder straps and cummerbund to reduce printing
- Manufactured: Vietnam (AR500 Armor)
The AR Concealment Plate Carrier will only hold soft armor.
PHOENIX ARMORED BACKPACK
- Material: Aramid Fiber, and Laminated Ripstop Nylon (sonic welded)
- Armor Protection: Level IIIA multi-hit protection against .357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1 g (125 gr) and a velocity of 1470 ft/s (+/- 30 ft/s) and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6 g
- Features: stops bullets used in 95% of gun-related homicides

