More Views

AR500 Armor® Level III+ Side Plate Body Armor 6" x 6"

45 USD

SKU: 3+6x6

Available to Order
Estimated Lead Time: Configure Options for Estimate


* Required Fields



AR500 Armor® 6" x 6" Side Plate Body Armor

Size & Cut: 6" x 6" Can be worn in conjunction with soft body armor plates

Weight: 2.7lbs (± 10% due to hand spraying PAXCON base coat)

Our armor ballistic core performance and balance of achieving multi-hit performance within its designated threat level; rounds exceeding the armors limitations and threat level or extreme multi-hit scenarios may cause the armor to crack upon impact. This result is normal and significantly reduces the rounds velocity, if not completely defeating, opposed to through and through penetration.


Manufacturer AR500 Armor
Rating filter No
Weight (LBS) 2.7000
Armor Level Level III+
Armor Threat Rating Level III+ multi-hit protection against 5.56x45 M193, 5.56x45 M855/SS109 at 3,100 FPS (+/- 30FPS), 7.62x51 M80 Ball (ie .308) at 3,000 FPS (+/- 30FPS), and DEA Certified
Armor Cut Orientation: No
Dimensions 6" x 6"
Armor Construction Material Ballistic steel core
Armor Shelf Life 20 Years
Thickness 0.26"
Discontinued? No


Customer Reviews

Great side plates! Review by Jacob Verified Purchase
I bough (2) 6x8 plates and put them to a 5.56 m855 and standard M193 test. I put about 30 rounds of m855 and around 20 m193 on the same plate at 25 meters and the plate only had one punch through somewhere in the last set of 20 m193 rounds! Very good quality and the Paxcon is really neat and will definitely protect you from fragmentation.

I recommend and I have the Warrior plate carrier with front (IV), back (IV), and both sides (III+) plus trauma pads for each plate. (Posted on 11/28/2016)
Review from Jason Review by Jason
Fantastic service and a fine product that I hope I'll never have to test. (Posted on 8/1/2016)
Review from mike christiansen Review by mike christiansen
The product is great I bought 2 10×12 and 2 6×6. The customer service is good everyone I talked to was polite and professional. They sent the wrong 6×6 plates but a little under 2 weeks after I first notified them I got the correct plates. I'm very happy with the plates I have now! (Posted on 12/11/2015)
Review from Jeff Review by Jeff
I have the 10X12 shooters cut Level III+ curved with the coating for my front and back plates and now I have these for my sides. I trust this vest with my life. A bit heavy BUT I know I'm protected if I were in the the plates. Top notch products from AR500!!!
(Posted on 11/9/2015)

Write Your Own Review

Only registered users can write reviews. Please, log in or register