AR Concealment Carrier by AR500 Armor®
Concealment Body Armor like nothing else. The revision of our concealment carrier is based around a single goal, maximum concealment. Down to material selection and form of each component the AR Concealment Carrier is designed to minimize printing.
AR Concealment Carrier (Empty): only 8.1oz
AR Concealment Carrier (Loaded with Front & Rear 10” x 12” IIIA Hybrid Soft Armor): only 2.6lb’s
We did away with traditional Cordura Nylon and went with a moisture wicking, breathable, 4-way stretch abrasion resistant fabric for each plate pocket. This switch thins the profile, improves comfort against the skin, and helps the carrier mold to the lines of your body improving concealment. The plate pockets are a keep it simple design, with a slight overlap passthrough on the lower 1/3 section of each plate pocket on the body facing side. This design allows you to easily insert your armor and does not require the use of plate pocket flaps and retention straps to secure the armor; reducing overall thickness of the plate carrier by not requiring layers of material to layer up over one another. This approach reduces the front side cummerbund print you see on traditional concealment type carriers
The shoulder straps are constructed from ultra-thin but strong Hypalon and are lined with low profile Velcro only where needed, while still allowing full adjustability. The combination of low-profile Velcro and Hypalon allowed us to create a shoulder strap design that minimized material overlap, again reducing thickness of the AR Concealment Carrier for improved concealment.
The cummerbund also uses low profile Velcro, and a reduced weight elastic material the cummerbunds adjustable retention. The cummerbund is adjustable on both the front and rear of the AR Concealment Carrier giving you the most options for concealment and reduced printing.
Form fitted for 10” x 12” soft body armor. We do not recommend the AR Concealment Carrier for use with hard armor, although it can be done, it is designed for maximum concealment of IIIA soft body armor.
Sizing. Small to 2 XL for standard t-shirt sizes.
100% Designed and Manufactured in our Phoenix, Arizona facility
|Approximate Weight (LBS)||2.0000|
|Plate Carrier Type||Concealment|
|Carrier Manufacturer||AR500 Armor (USA)|
|Carrier Construction Material||500D Nylon|
|Largest Supported Plate Size||10" x 12"|